ENDRESS HAUSER TEMPERATURE TRANSMITTERS
کلیه تجهیرات اندازه گیری و کنترل دما ساخت کمپانی اندرس + هاوزر
For use in hygienic and aseptic applications in the Food & Beverages and Life Sciences industries
Measuring range: Pt100: -200 °C to +600 °C, StrongSens: -50 °C to +500 °C and QuickSens: -50 °C to +200 °CA wide choice of hygienic process connections is available: Compression fitting, weld-in adaptor, metallic sealing system, clamp connection as per ISO 2852, screwed pipe joint as per DIN 11851, also aseptic version as per DIN 11864-1 and much more.Material for wetted parts: 316L (1.4435) delta-ferrit < 1% with maximum surface finishing Ra < 0.38 µm electropolished. A straight, reduced or tapered tip shape for a fast response time is selectable.More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: iTHERM StrongSens - Pt100 vibration resistant up to 60g, accuracy class A or AA acc. to IEC 60751Process connection: Variety of different threads, NPT / M / G / RMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Process pressure up to 100 bar, depending on the process connectionProcess connection: Variety of different threads and flanges according to ASME standardMore information >>>
Cost efficient RTD sensor for use in many process and laboratory applications
Measuring range: -50 °C to +400 °CSensor: Pt100 with accuracy class A, AA or B according to IEC 60751Process connection: Without, with compression fittings or threadsMore information >>>
Compact and cost-saving for safe monitoring of process temperatures
Sensor: Integrated Pt100 (accuracy class A according to IEC 60751) in a range from -50 °C to +150 °C (-58 to 302 °F), optional up to +200 °C (+392 °F).Protection class: IP65PC programmableMore information >>>
Applicable for cement production, steel treatment, incinerators and fluidized bed furnaces
Maximum operating temperature range of thermocouple: Typ J (-180 °C to +750°C), Typ K (-180 °C to +1372 °C), Typ N (-270 °C.. to +1300 °C), Typ S (-50 °C to +1750 °C), Typ R (-50 °C to +1700 °C), Typ B (+100 °C to +1820 °C)Flexible configurable robust thermometer with the following tube materials: 316L, 310, 304, 446; INCONEL® 600, 601; INCOLOY® 800HT; HASTELLOY® X, Kanthal AF, Kanthal Super, Nickel/Cobalt alloy (NiCo) and Silicon Nitride ceramic (SiN)A optional head transmitter with all common communication protocolls makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. Protocols: 4 bis 20 mA, HART®, PROFIBUS® PA, Fieldbus™More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: –40 to 1100 °C (–40 to 2012 °F)Sensor type K and J with accuracy "class 1" acc. to IEC 60584 and "special" acc. ASTM E230-03Process connection: Variety of different threads, NPT / M / G / RMore information >>>
Compact, fast and precise for the measurement of process temperatures in common industries
Measuring range: -50 °C to +200 °C (-58 °F to +392 °F)Sensor: Pt100 with accuracy class A according to IEC 60751, sensor response time t90: < 2.0 sProcess connection: Thread G, M, or NPT form, compression fittingMore information >>>
Compact, fast and precise for the measurement of process temperatures in hygienic applications
Measuring range: -50 °C to +200 °C (-58 °F to +392 °F)Sensor: Pt100 with accuracy class A according to IEC 60751, sensor response time t90: < 2.0 sProcess connection: Thread, Clamp, APV-Inline, Varivent, DIN11851More information >>>
Transformation of sensor signals into stable and standardized output signals for all industries
Input: 1/2 x RTD, TC, Ω, mV; Output: 1 x analog 4 to 20 mAPower supply: 11 to 42 V DC (standard version head transmitter); 12 to 42 V DC (standard version DIN rail transmitter); ≤ 30 V DC (Ex version)Communication: HART®-protocolMore information >>>
Transformation of sensor signals into standardized digital output signals for all industries
Input: 1/2 x RTD, TC, Ω, mV; Output: 1 x digitalPower supply: 9 to 32 V DC (PROFIBUS® PA); 9 to 17.5 V DC (FISCO/FNICO)
More information >>>
Transformation of sensor signals into standardized digital output signals for all industries
Input: 1/2 x RTD, TC, Ω, mV; Output: 1 x digitalPower supply: 9 to 32 V DC (FOUNDATION Fieldbus™ H1); 9 to 17.5 V DC (FISCO/FNICO)Communication: FOUNDATION Fieldbus™ H1 protocolMore information >>>
Designed for hygienic and aseptic applications in the Food & Beverages and Life Sciences industries
Fabricated protection tube in hygienic and aseptic design (EHEDG, 3-A, ASME, BPE, FDA) as well as metric style. QuickNeck for easy and cost saving recalibration.A wide choice of hygienic process connections is available: Compression fitting, weld-in adaptor, metallic sealing system, clamp connection as per ISO 2852, screwed pipe joint as per DIN 11851, also aseptic version as per DIN 11864-1 and much more.
More information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Materials wetted parts: SS316L, INCONEL600, Hastelloy C276, Titan, MonelProcess connection: Thread or weld-in versionMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: –40 to 1100 °C (–40 to 2012 °F)Sensor type K and J with accuracy "class 1" acc. to IEC 60584 and "special" acc. ASTM E230-03Process connection: compression fittingMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: –40 to 1100 °C (–40 to 2012 °F)Sensor type K and J with accuracy "class 1" acc. to IEC 60584 and "special" acc. ASTM E230-03Process connection: Variety of different flangesMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: –40 to 1100 °C (–40 to 2012 °F)Sensor type K and J with accuracy "class 1" acc. to IEC 60584 and "special" acc. ASTM E230-03Process connection: Variety of different flanges and weld-in versionsMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: –40 to 100 °C (–40 to 2 012 °F)Process pressure up to 75 bar, depending on the process connectionProcess connection: Variety of different threads, compression fittings, flanges according to EN and ASME standardMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: –40 to 1 100 °C (–40 to 2 012 °F)Process pressure depending on the thermowell usedConnection to thermowell: Threaded nipple, nipple-union-nipple combinationsMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: –40 to 1 100 °C (–40 to 2 012 °F)Process pressure up to 100 bar, depending on the process connectionProcess connection: Variety of different threads, compression fittings, flanges according to ASME standardMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: –40 to 1 100 °C (–40 to 2 012 °F)Process pressure up to 75 bar, depending on the process connectionProcess connection: Variety of different threads, compression fittings, spring load compression fittingsMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: –40 to 1 100 °C (–40 to 2 012 °F)Process pressure up to 100 bar, depending on the process connectionProcess connection: Variety of different threads and flanges according to ASME standardMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: –40 to 1100 °C (–40 to 2012 °F)Sensor type K and J with accuracy "class 1" acc. to IEC 60584 and "special" acc. ASTM E230-03Process connection: Variety of different threads G, M, NPT or R form and compression fittingsMore information >>>
Best in class temperature measurement technology for general applications
Measuring range: -200 to +600 °C (-328 to +1112 °F)Sensor: Pt100 with accuracy class A or B according to IEC 60751Process connection: Thread NPT form or weld-in vesionMore information >>>
For standard hygienic and aseptic applications in the Food & Beverages and Life Sciences industries
Measuring range: Pt100: -50 °C to +200 °C in non-hazardous areasA variety of hygienic process connections is available: Compression fitting for weld-in, metallic sealing system, clamp connection as per ISO 2852, screwed pipe joint as per DIN 11851, also Varivent, SMS 1147 and thread for weld-in adaptor.Material for wetted parts: 316L with maximum surface finishing Ra < 0.38 µm. A straight or reduced tip shape for a fast response time is selectable.More information >>>
Transformation of sensor signals into standardized digital output signals for all industries
Input: Up to 8 x RTD, TC, Ohm, mV; Output: 1 x digitalPower supply: 9 to 32 V DC (FOUNDATION Fieldbus™ H1)Communication: FOUNDATION Fieldbus™ H1 protocolMore information >>>
Transformation of sensor signals into stable and standardized output signals for all industries
Input: 1 x RTD, TC, Ohm, mV; Output: 1 x analog 4 to 20 mAPower supply: 11 to 40 V DC (standard version); 11 to 30 V DC (Ex version)Communication: HART® protocolMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Electronic transmitter with scaleable 4 to 20 mA analog output, HART protocol, litup display, fieldhousing in aluminum or stainless steel SS316, approvals for hazardous areas acc. to ATEX and CSA (intriniscally safe, explosion proof, non sparking)Measurement inserts made from mineral isolated stainless steal sheathed cable; RTD Sensor Pt100 with accuracy class A or AA acc. to IEC 60751, Measurement range: -200 °C to 600 °C; to be assembled into a separate thermowellConnection to the thermowell via thread; extension configurable; transmitter with galvanic isolation und sensor monitoring acc. to NAUMUR NE43, NE89More information >>>
Electronic monitoring, conversion and display of input signals - all over the industries
Input: 2 x RTD, TC, Ohm, mV; Output selectively: Analog 4 to 20 mA or digitalPower supply: 11 to 40 V DC (standard version HART®), 11 to 30 V DC (Ex version HART®); 9 to 32 V DC (standard version FF), 9 to 24 V DC (Ex version FF); 9 to 32 V DC (standard version PA), 9 to 24 V DC (Ex version PA)Communication selectively: HART® protocol, FOUNDATION Fieldbus™ H1 or PROFIBUS® PAMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Electronic transmitter protocols: 4 to 20 mA HART, Profibus PA, Foundation Fieldbus; fieldhousing in aluminum or stainless steel SS316, display, approvals for hazardous areas acc. to ATEX and CSA (intriniscally safe, explosion-proof, non sparking)Measurement inserts made from mineral isolated stainless steal sheathed cable; RTD Sensor Pt100 with accuracy class A or AA acc. to IEC 60751 , Measurement range: -200 °C to 600 °C; to be assembeld into a separate thermowellConnection to the thermowell via thread; extension configurable; two-channel transmitter und sensor monitoring acc. to NAUMUR NE43, NE89More information >>>
Transformation of sensor signals into stable and standardized output signals for all industries
Input: 1 x RTD, TC, Ohm, mV; Output: 1 x analog 4 to 20 mAPower supply: 8 to 35 V DC (standard-version); 8 to 30 V DC (Ex-version)Communication: PC programmableMore information >>>
Transformation of sensor signals into stable and standardized output signals for all industries
Input: 1 x RTD, TC, Ohm, mV; Output: 1 x analog 4 to 20 mAPower supply: 11.5 to 35 V DC (standard version); 11.5 to 30 V DC (Ex version)Communication: HART® protocolMore information >>>
Transformation of the sensor signals into stable and standardized output signal for all industries
Input: 1 x RTD (Pt100); Output: 1 x analog 4 to 20 mAPower supply: 8 to 35 V DCCommunication: PC programmableMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: iTHERM StrongSens - Pt100 vibration resistant up to 60g, accuracy class A or AA acc. to IEC 60751Thread Process connection: metrical - M; Withworth pipe thread - G,R; National Pipe Taper NPTMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: iTHERM StrongSens - Pt100 vibration resistance up to 60g with accuracy class A or AA according to IEC 60751Process connection: compression fittingMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: iTHERM StrongSens - Pt100 vibration resistant up to 60g, accuracy class A or AA acc. to IEC 60751Process connection: Variety of different DIN, ANSI and ASME flangesMore information >>>
Robust temperature measurement technology especially for gas and steam applications
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: iTHERM StrongSens - Pt100 vibration resistant up to 60g, accuracy class A or AA acc. to IEC 60751Process connection: Flange, weld-in versionMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: Pt100 with accuracy class A or AA DIN B according to IEC 60751, increased vibration resistanceProcess connection: Compression fittingMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: Pt100 with accuracy class A or AA according to IEC 60751, increased vibration resistanceProcess connection: Thread G or NPT formMore information >>>
Safe monitoring of process temperatures in challenging applications e.g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Process pressure up to 75 bar, depending on the process connectionProcess connection: Variety of different threads, compression fittings, flanges according to EN and ASME standardMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Process pressure depending on the thermowell usedConnection to thermowell: Threaded nipple, nipple-union-nipple combinationsMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Process pressure up to 100 bar, depending on the process connectionProcess connection: Variety of different threads, compression fittings, flanges according to ASME standardMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Process pressure up to 75 bar, depending on the process connectionProcess connection: Variety of different threads, compression fittings, spring load compression fittingsMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: iTHERM StrongSens - Pt100 vibration resistant up to 60g, accuracy class A or AA acc. to IEC 60751Process connection: Thread G, M, NPT, R form or compression fittingMore information >>>
Cost efficient thermocouple sensor designed for use in many process and laboratory applications
Measuring range: -40 °C to +760 °C (type J) and -40 to +1200 °C (type K).Sensor: Integrated thermocouples according to IEC 60584 and ASTM E230/ANSI MC96.1, response time sensor: t90 = 2 s
-
Process connection: Without or with compression fittings G1/8", G¼", G3/8", G½", 1/8" NPT, ¼" NPT, 3/8" NPT, ½" NPT
More information >>>
Compact and cost-saving for safe monitoring of process temperatures in hygienic applications
Sensor: Integrated Pt100 (accuracy class A according to IEC 60751) in a range from -50 °C to +150 °C (-58 to +302 °F), optional up to +200 °C (+392 °F).Protection class: IP65PC programmableMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Materials wetted parts: SS316L, INCONEL600, Hastelloy C276, Titan, MonelProcess connection: FlangeMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: Pt100 with accuracy class A or B according to IEC 60751Process connection: ThreadMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: Sensor type T -270 to 370 °C (-454 to 698 °F), type J -210 to 720 °C (-346 to 1328 °F), type E -270 to 820 °C (-454 to 1508 °F), type K and N -270 to 1150 °C (-454 to 2102 °F)Materials wetted parts: SS316L, INCONEL600, HastelloyC276, Titan, MonelProcess connection: Thread or weld-in versionMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: Sensor type T -270 to 370 °C (-454 to 698 °F), type J -210 to 720 °C (-346 to 1328 °F), type E -270 to 820 °C (-454 to 1508 °F), type K and N -270 to 1150 °C (-454 to 2102 °F)Materials wetted parts: SS316L, INCONEL600, HastelloyC276, Titan, MonelProcess connection: FlangeMore information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Measuring range: –270 to 1150 °C (–454 to 2102 °F)Sensor accuracy class 1 or 2 according to IEC 60584Process connection: ThreadMore information >>>
For use in medium duty general applications, mainly to protect the insert from chemical corrosion
Fabricated protection tube according to calculation standard DIN 43772Process connection, threaded: G½" with a fixing screw for the insertMaterial for wetted parts: 316Ti with surface finishing Ra < 1.6 µmMore information >>>
For use in general purpose industrial applications in which processes generate medium-high stress
Process connection, threaded: G½", G¾" according to DIN43772; NPT ½", NPT ¾" according to ANSI as well as R½", R¾" as per JIS B 0203Material for wetted parts: 316L with surface finishing Ra < 1.6 µmMore information >>>
Designed for use with resistance or thermocouple thermometers in heavy duty applications.
Fabricated protection tube according to calculation standard DIN 43772.Process connection, threaded: ½" NPT, ¾" NPT, 1" NPT as well as 1½" NPT or in different flange sizes according to following standards ASME B16.5 and EN1092-1.Material for wetted parts: 316 or 446 with surface finishing Ra < 1.6 µm.More information >>>
For use with resistance or thermocouple thermometers principally in heavy duty applications
Fabricated protection tube according to calculation standard DIN 43772Process connection, threaded: 1" NPT, 1½" NPT or in different flange sizes according to following standards ASME B16.5 and EN1092-1Material for wetted parts: 316 with surface finishing Ra < 1.6 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar and with root diameter 20 mmProcess connection is available as thread NPT ¾" or as different flange sizes according to standard ANSI B16.5Material for wetted parts: 316, 316L, 316Ti with maximum surface finishing Ra < 0.8 µm.More information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar and with root diameter 24 mmProcess connection is available as NPT 1" thread or as different flange sizes according to standard ANSI B16.5Material for wetted parts: 316, 316L, 316Ti with maximum surface finishing Ra < 0.8 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar and with root diameter 25 mmProcess connection is available as thread NPT 1" or as different flange sizes according to standard ANSI B16.5Material for wetted parts: 316, 316L, 316Ti with maximum surface finishing Ra < 0.8 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar and with root diameter 25 mmProcess connection is available as thread NPT 1" or as different flange sizes according to the standards ANSI B16.5 or JIS B 2220Material for wetted parts: 316, 316L, 316Ti with maximum surface finishing Ra < 0.8 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar. The nominal root diameter can be selected from 16, 19.5, 20 or 22 mmProcess connection is available as thread NPT ¾"Material for wetted parts: 316, 316L, 316Ti with maximum surface finishing Ra < 0.8 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar. The nominal root diameter can be selected from 12.7 mm or 16 mmProcess connection is available as thread can be selected in various sizes: NPT ½", NPT ¾", G½" or M20x1.5Material for wetted parts: 316, 316L, 316Ti with maximum surface finishing Ra < 0.8 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar. The nominal root diameter can be selected from 19.5, 20, 25 or 27 mmProcess connection is available as thread NPT 1"
More information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
-
Barstock thermowell for maximum process pressure up to 500 bar. The nominal root diameter can be selected from 12.7, 22 or 25 mm
-
Process connection is available as thread NPT 1"
-
Material for wetted parts: 316, 316L, 316Ti with maximum surface finishing Ra < 0.8 µm
More information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
-
Barstock thermowell for maximum process pressure up to 500 bar and with root diameter 25 mm
-
Material for wetted parts: 316, 316L, 316Ti and 321 with maximum surface finishing Ra < 0.8 µm
More information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar and with selectable root diameter 20 mm or 25.4 mmMaterial for wetted parts: 316, 316L and 316Ti with maximum surface finishing Ra < 0.8 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar and with selectable root diameter 22 mm or 27 mmMaterial for wetted parts: 316, 316L and 316Ti with maximum surface finishing Ra < 0.8 µmMore information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Barstock thermowell for maximum process pressure up to 500 bar and with root diameter 27 mmProcess connection is available as different flange sizes according to the standards ANSI B16.5, EN1092-1, DIN2527
More information >>>
Made of drilled barstock material. Mainly used in heavy duty or general purpose applications.
Process connection is available as different flange sizes according to the standards ANSI B16.5 and EN1092-1Material for wetted parts: 316, 316L and 316Ti with maximum surface finishing Ra < 0.8 µm. Several nominal inner diameter.More information >>>
Applicable for steel treatment (annealing), concrete furnaces and primaries
Maximum operating temperature range of thermocouple: Typ J (-180 °C to +750°C), Typ K (-180 °C to +1372 °C), Typ N (-270 °C.. to +1300 °C), Typ S (-50 °C to+1750 °C), Typ R (-50 °C to +1700 °C), Typ B (+100 °C to +1820 °C)The flexible configurable, robust thermometer is designed for use in challenging applications in e.g. steel treatment or industrial furnaces. Protection tube materials: ceramic C610, sintered silicon carbide (SiC), silicon nitride ceramic (SiN)
-
A optional head transmitter with all common communication protocolls makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. Protocols: 4 to 20 mA, HART®, PROFIBUS® PA, Fieldbus™
More information >>>
Applicable for ceramic baking ovens, brickworks, porcelain production and glass industries
Maximum operating temperature range of thermocouple: Typ S (-50 °C to +1750 °C), Typ R (-50 °C to +1700 °C), Typ B (+100 °C to +1820 °C)The flexible configurable, robust thermometer is designed for use in challenging applications in e.g. brick kilns, ceramic. Internal and external protection tube materials: Ceramic C610 or C799
-
A optional head transmitter with all common communication protocolls makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. Protocols: 4 bis 20 mA, HART®, PROFIBUS® PA, Fieldbus™
More information >>>
Applicable for ceramic baking ovens, brickworks, porcelain production and glass industries
Maximum operating temperature range of thermocouple: Typ S (-50 °C to +1750 °C), Typ R (-50 °C to +1700 °C), Typ B (+100 °C to +1820 °C)The flexible configurable, robust thermometer is designed for use in challenging applications in e.g. brick kilns, ceramic. Protection tube materials: Ceramic C610 or C799
-
A optional head transmitter with all common communication protocolls makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. Protocols: 4 bis 20 mA, HART®, PROFIBUS® PA, Fieldbus™
More information >>>
Applicable for ceramic baking ovens, brickworks, porcelain production and glass industries
Maximum operating temperature range of thermocouple: Typ S (-50 °C to +1750 °C), Typ R (-50 °C to +1700 °C), Typ B (+100 °C to +1820 °C)The flexible configurable, robust thermometer is designed for use in challenging applications in e.g. glass production. Material protection tube: Ceramic C530, C610 or C799 (outer sheath); ceramic C610, C799 (intermediate and internal sheath)A optional head transmitter with all common communication protocolls makes the device ready to use with enhanced measurement accuracy and reliability compared to directly wired sensors. Protocols: 4 bis 20 mA, HART®, PROFIBUS® PA, Fieldbus™More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: –40 to 1100 °C (–40 to 2012 °F)Sensor type K,J and T with accuracy class 2 according to IEC 60584Process connection: Compression fittingMore information >>>
Best in class temperature measurement technology for general applications
Measuring range: -200 to +600 °C (-328 to +1112 °F)Sensor: Pt100 with accuracy class A or B according to IEC 60751Process connection: Thread NPT or G form, compression fittingMore information >>>
Cost efficient RTD sensor designed for use in the process industry or factory automation
Measuring range: -328 °F to +1112 °F (wire wound) or -58 °F to +392 °F (thin film)Sensor: Pt100 with accuracy class A or B according to IEC 60751
More information >>>
Best in class temperature measurement technology for general applications
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensor: Pt100 with accuracy class A or B according to IEC 60751Process connection: Flange according to ANSIMore information >>>
Best in class temperature measurement for general applications
Measuring range: -200 to +600 °C (-328 to +1112 °F)Sensor: Pt100 with accuracy class A or B according to IEC 60751Process connection: Threaded connection to existing thermowellMore information >>>
Designed for use in hygienic and aseptic applications in Food&Beverages and Life Sciences industries
Measuring range: Pt100: -200 to 200 °C (-328 to 392 °F)Various dimensions of Tri-clamp connections (1" to 3") are available as process connection.Material for wetted parts: 316L with maximum surface finishing Ra = 0.8 µm (32 µin). It is designed with a straight or reduced tip shape for fast response times.More information >>>
Designed for use in hygienic and aseptic applications in Food&Beverages and Life Sciences industries
Measuring range: Pt100: -50 to 200 °C (-58 to 392 °F)Different dimensions of MicroClamp connections are available as process connection. As a standard feature there is no protection tube available. The measurement insert is in direct contact with the process medium.Material for wetted parts: 316L with maximum surface finishing Ra = 0.5 µm (20 µin). It is designed with a straight tip shape for fast response times.More information >>>
Designed for use in hygienic and aseptic applications in Food&Beverages and Life Sciences industries
Selectable measuring range Pt100: low range = -50 to 200 °C (-58 to 392 °F), high range = -200 to 600 °C (-328 to 1112 °F)Various dimensions of Tri-clamp or MicroClamp connections are available as process connection
More information >>>
Best in class temperature measurement technology for general applications
Measuring range: Sensor type T -270 °C to +370°C (-454 °F to +698 °F), type J -210 °C to +720 °C (-346 °F to +1328 °F), type E -270 °C to +820 °C (-454 °F to +1508 °F), type K and N -270 °C to +1150 °C (-454 °F to +2102 °F)
More information >>>
Cost efficient TC sensor designed for use in many process and laboratory applications
Measuring range: 32 to +1600 °F (type E), 32 to +1400 °F (type J), 32 to +2300 °F (type K and N) or 32 to +700 °F (type T).Sensor: Different integrated thermocouples with accuracy class 1 or 2 according to IEC 60584Process connection: Without or compression fittings 1/8" NPT, ¼" NPTMore information >>>
Best in class temperature measurement technology for general applications
Measuring range: Sensor type T -270 °C to +370 °C (-454 °F to +698 °F), type J -210 °C to +720 °C (-346 °F to +1328 °F), type E -270 °C to +820 °C (-454 °F to +1508 °F), type K and N -270 °C to +1150 °C (-454 °F to +2102 °F)Sensor: TC with accuracy class 1 or 2 according to IEC 60584Process connection: Thread NPT form or weld-in versionMore information >>>
Best in class temperature measurement technology for general applications
Measuring range: Sensor type T -270 °C to +370 °C (-454 °F to +698 °F), type J -210 °C to +720 °C (-346 °F to +1328 °F), type E -270 °C to +820 °C (-454 °F to +1508 °F), type K and N -270 °C to +1150 °C (-454 °F to +2102 °F)
More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: Sensor type T -270 °C to +370 °C (-454 °F to +698 °F), type J -210 °C to +720 °C (-346 °F to +1328 °F), type E -270 °C to +820 °C (-454 °F to +1508 °F), type K and N -270 °C to +1150 °C (-454 °F to +2102 °F)
More information >>>
Cost efficient thermocouple sensor designed for use in many process and laboratory applications
Measuring range: 32 to +1600 °F (type E), 32 to +1400 °F (type J), 32 to +2300 °F (type K and N) or 32 to +700 °F (type T).Sensor: Different integrated thermocouples with accuracy class 1 or 2 according to IEC 60584
More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: Sensor type J: -210 to +760 °C (-346 to +1400 °F), type K and N: -270 to +1100 °C (-454 to +2012 °F), type T: -270 to +400 °C (-454 to +725 °F)
-
Accuracy according to ASTM E230-03/ANSI MC96.1: Type J ±1.1 K or ±0.004 |t| (0 to +760 °C), type K and N ±1.1 K or ±0.004 |t| (0 to +1260 °C) and type T ±0.5 K or ±0.004 |t| (0 to +370 °C)
-
Process connection: Thread, compression fitting
More information >>>
Appropriate for applications with high process temperatures
-
Measuring range: -210 °C to +760 °C (type J), -270 to +1100 °C (type K, N) and -270 to +400 °C (type T).
-
Sensor: Integrated thermocouples according to ASTM E230-03
-
Process connection: compression fitting 1/8" NPT, ¼" NPT, 3/8" NPT, ½" NPT
More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: Sensor type J: -210 to +760 °C (-346 to +1400 °F), type K and N: -270 to +1100 °C (-454 to +2012 °F), type T: -270 to +400 °C (-454 to 725 °F)Accuracy according to ASTM E230-03/ANSI MC96.1: Type J ±1.1 K or ±0.004 |t| (0 to +760 °C), type K and N ±1.1 K or ±0.004 |t| (0 to +1260 °C) and type T ±0.5 K or ±0.004 |t| (0 to +370 °C)
More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to +1112 °F)Sensor: Pt100 with accuracy class A according to IEC 60751 or Band 5 (1/10 DIN)
More information >>>
Appropriate for all temperature measurement applications where small immersion lengths are needed
Measuring range: -200 °C to +600 °C.Sensor: Pt100 with accuracy class A according to IEC 60751 and Band 5 (1/10 DIN)Process connection: compression fitting ¼" NPT, ½" NPTMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to +1112 °F)Sensor: Pt100 with accuracy class A according to IEC 60751 or Band 5 (1/10 DIN)Process connection: Fixed thread or union nipple, NPT or G formMore information >>>
Fabricated thermowell with threaded process and thermometer connections
Fabricated thermowell for low pressure with hexagonal extension neckProcess connection, threaded: NPT ½", NPT ¾", G½" (BSPP)Material for wetted parts: SS316/L with a straight tip shapeMore information >>>
Transformation of sensor signals into stable and standardized output signals for all industries
Input: 1 x RTD, TC, Ohm, mV; Output: 1 x analog 4 to 20 mAPower supply: 12 to 35 V DC (standard-version); 12 to 30 V DC (Ex-version)Communication: PC programmableMore information >>>
Transformation of sensor signals into stable and standardized output signals for all industries.
Input: 1 x RTD, TC, Ohm, mV; Output: 1 x analog 4 to 20 mAPower supply: 12 to 35 V DC (standard version); 12 to 30 V DC (Ex version)Communication: HART® protocolMore information >>>
Transformation of sensor signals into stable and standardized output signals for all industries
Input: 1 x RTD, TC, Ohm, mV; Output: 1 x analog 4 to 20 mAPower supply: 12 to 35 V DC (standard-version); 12 to 30 V DC (Ex-version)
More information >>>
Transformation of sensor signals into stable and standardized output signals for all industries
Input: 1 x RTD, TC, Ohm, mV; Output: 1 x analog 4 to 20 mAPower supply: 12 to 35 V DC (standard version); 12 to 30 V DC (Ex version)Communication: HART® protocolMore information >>>
Transformation of the sensor signal into a stable and standardized output signal for all industries
Input: 1 x RTD (Pt100); Output: 1 x analog 4 to 20 mAPower supply: 12 to 35 V DC (standard version), 12 to 30 V DC (Ex version)More information >>>
Transformation of the sensor signal into a stable and standardized output signal for all industries
Input: 1 x TC (e. g. type K); Output: 1 x analog 4 to 20 mAPower supply: 12 to 35 V DC (standard version), 12 to 30 V DC (Ex version)More information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Electronic transmitter with scaleable 4 to 20mA-analog-output and HART protocol, lit up display, fieldhousing in aluminum or stainless steel SS316, approvals for hazardous areas acc. to ATEX and CSA (intrinsically safe, explosion-proof, non sparking)Measurement inserts made from mineral isolated stainless steal sheathed cable; thermocouple type K or J; Accuracy class 1 or 2 acc. to IEC 60584 or ANSI, Measurement range: -40 °C to 1100 °C; to be assembled into a separate thermowellConnection to the thermowell via thread; extension configurable; transmitter with galvanic isolation and sensor monitoring acc. to NAUMUR NE43, NE89More information >>>
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry
Electronic transmitter protocols: 4 to 20 mA HART, Profibus PA, Foundation Fieldbus; fieldhousing in aluminum or stainless steel SS316, display, approvals for hazardous areas acc. to ATEX and CSA (intriniscally safe, explosion proof, non sparking)Measurement inserts made from mineral isolated stainless steal sheathed cable; thermocouple type K or J; Accuracy class 1 or 2 acc. to IEC 60584 oder ANSI, Measurement range: -40 °C to 1100 °C; to be assembeld into a separate thermowell
More information >>>
Transformation of the sensor signal into a stable and standardized output signal for all industries
Input: 1 x RTD (Pt100); Output: 1 x analog 4 to 20 mAPower supply: 8 to 35 V DCCommunication: PC programmableMore information >>>
Transformation of the sensor signal into a stable and standardized output signal for all industries
Input: 1 x RTD (Pt100); Output: 1 x analog 4 to 20 mAPower supply: 8 to 35 V DC (standard version), 8 to 30 V DC (Ex version)More information >>>
Transformation of the sensor signal into a stable and standardized output signal for all industries
Input: 1 x TC (e.g. type K); Output: 1 x analog 4 to 20 mAPower supply: 8 to 35 V DC (standard version), 8 to 30 V DC (Ex version)More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -50 to +400 °C (-58 to +752 °F)Sensor: Pt100 with accuracy class A according to IEC 60751Process connection:Thread G or NPT formMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -50 °C to +600 °C (-58 °F to +1112 °F)Sensor: Pt100 with accuracy class A or AA according to IEC 60751Process connection: Thread G, M, or NPT formMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to +1112 °F)Sensor: Pt100 with accuracy class A and B according to IEC 60751Process connection: Compression fittingMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to +1112 °F)Sensor: Pt100 with accuracy class A or B according to IEC 60751Process connection: Thread G formMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -50 °C to 600 °C (-58 °F to 1112 °F)Sensor: Pt100 with accuracy class A or AA according to IEC 60751
More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Maximum measuring range: –50 to +100 °C (–58 to +212 °F)Sensor: Pt100 with accuracy class A or B according to IEC 60751
Reliable, long term stable and accurate indoor or outdoor ambient temperature measurement
More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -50 °C to +300 °C (-58 °F to +572 °F)Sensor: Pt100 with accuracy class A according to IEC 60751Process connection: Thread G formMore information >>>
Suitable for the temperature measurement of pipe surfaces or container walls
Measuring range: -20 °C to +180 °C (-4 °F to +356 °F)Sensor: Single or double Pt100 with accuracy class A or B according to IEC 60751Response time: Depends on measurement point design and installationMore information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -200 to +600 °C (-328 to 1112 °F)Sensors in matched pairs within the range: 0 to 120 °C (±0.05 K) and –40 to 0 °C (±0.1 K)Process connection: Thread G 1/2"More information >>>
For Oil & Gas applications. Vanstone type, design with collar flange
Drilled bar stock thermowell, designed as a Vanstone thermowell.Flanged process connection, designed as collar flange. ANSI 1½" up to 1500 lbs; 2" up to 2500 lbs.EN DN25 and DN50 up to PN160.
More information >>>
Designed for use in the fine chemicals industry and generally for almost all industrial processes
Fabricated protection tube according to calculation standard DIN 43772 with neck.Process connection, threaded: G½" and 1" DIN; G½", G¾" and 1" BSP cyl.; NPT½" and NPT ¾"; M20 x 1.5
More information >>>
Designed for use in the fine chemicals industry and generally for almost all industrial processes
Fabricated protection tube according to calculation standard DIN 43772, designed without neckProcess connection, threaded: G½" and 1" DIN; G½", G¾" and 1" BSP cyl.; NPT½" and NPT ¾"; M20 x 1.5Material for wetted parts: 316, 316L and 316Ti with surface finishing Ra < 0.8 µm. A straight, reduced or tapered tip shape is selectable.More information >>>
Designed for use in the fine chemicals industry and generally for almost all industrial processes
Fabricated protection tube according to calculation standard DIN 43772Process connection is an adjustable compression fitting with thread: G½", G¾", 1" as well as R½", R¾", 1" according to JIS B 0203; NPT½"; M20 x 1.5. A weld in adapter TA70 is also availableMaterial for wetted parts: 310, 316L, 316Ti, INCONEL600, Hastelloy C276 with surface finishing Ra < 0.8 µm.More information >>>
Designed for use in processes with heavy thermal and mechanical stresses
Fabricated protection tube according to calculation standard DIN 43772Process connection is available in different flange sizes according to following standards ANSI B16.5, EN1092-1, JIS B 2220 and ISO7005-1
-
Material for wetted parts: 316L, 316Ti, Inconel 600, Hastelloy C-276 with surface finishing Ra < 1.6 µm. An oversheath made of PTFE, PVDF or Tantalum can be supplied for straight tip form.
More information >>>
Thermowell made of drilled barstock material. Mainly used in heavy duty or industrial applications
Process connection is available as weld-in connection or in different flange sizes according to following standards ANSI B16.5, EN1092-1, JIS B 2220 and ISO7005-1Material for wetted parts: 316Ti, Hastelloy C-276, Titanium grade 2, C22.8, 13CrMo4-5, Duplex SAF2205, 16Mo3, 10CrMo 9 10 with maximum surface finishing Ra < 0.8 µm. Tip shape is conical reduced.More information >>>
The protection tube with built-in compression fitting allows varying types of probes to be applied
Fabricated protection tube with integrated compression fitting for compact thermometers, assemblies without protection tube or cable probes, generally for insert diameter 6 mmThe process connection is available as thread G½", G¼", ½" NPT or to weld in spherical or cylindricalMaterial for wetted parts: 316L with maximum surface finishing Ra < 0.4 µm.More information >>>
For steel treatment, concrete furnaces and primaries with very high process temperatures
Fabricated protection tube from segments. Replacement part for high temperature TC thermometer TAF11Ceramic protection tube made from robust ceramic materialsMaterials: ceramic C610, sintered silicon carbide (SiC), silicon nitride ceramic (SiN) for temperatures up to 1600 °C (2912 °F)More information >>>
For processes with high process temperatures like cement production, steel treatment, incinerators
Fabricated protection tube from segments. Replacement part for high temperature TC thermometer TAF16Ceramic or metallic protection tube, internal sheath as optionTube materials: 316L, 310, 304, 446; INCONEL600, 601; INCOLOY® 800HT; HASTELLOY® X, Kanthal AF, Kanthal Super, Nickel/Cobalt alloy (NiCo) and Silicon Nitride ceramic (SiN) for temperatures up to 1700 °C (3092 °F)More information >>>
Designed for use in the Oil & Gas industry. For installation in already existing thermowells
Measuring range: Resistance insert (RTD): –50 to +500 °C (–58 to +932 °F) or thermocouple (TC) type K: –40 to +1 100 °C (–40 to +2 012 °F), depends on thermowell
Sensor: RTD class A according to IEC 60751 with enhanced vibration resistance > 60g, TC class 1 according to IEC 60584
Material insert sheath: SS 316L for RTD or Inconel600 for TCOuter diameter insert sheath: 6 mm, optional with sleeve Ø8 mmMore information >>>
Designed for use in the Oil & Gas industry, with flanged process connection and an extension neck
Measuring range: Resistance insert (RTD): –50 to +500 °C (–58 to +932 °F) or thermocouple (TC) type K: –40 to +1 100 °C (–40 to +2 012 °F)Sensor: RTD class A according to IEC 60751 with enhanced vibration resistance > 60g, TC class 1 according to IEC 60584
Material for wetted parts: AISI 316L (1.4404 or 1.4435), AISI 316Ti (1.4571) or INCONEL600 (2.4816)
More information >>>
Designed for use in the Oil & Gas industry with flanged process connection
Fabricated thermowell similar to DIN 43772 form 2F/3F
Process connection is available in different flange sizes: DN25 PN40 B1 or DN25 PN63 B1 according to EN1092-1
Material for wetted parts: AISI 316Ti (1.4571)
More information >>>
High precision average temperature measurement
Temperature: -20 to +100°C (-4 to +212°F), Measuring distance: 18.5m (60.6ft)Accuracy: ±0.1°CMore information >>>
High precision average temperature measurement
Multi-signal converter with precision average temperature and water bottom sensorTemperature: -40 to +100°C (-40 to +212°F), Measuring distance: 40m (131.2ft)
More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -30 °C to +300 °C (-22 °F to +572 °F)Sensor: Pt100 with accuracy class A according to IEC 60751Process connection: Thread G ½"More information >>>
Comprehensive and common temperature measurement technology for almost all branches of industry
Measuring range: -30 °C to 200 °C (-22 °F to 392 °F)Sensor: Pt100 with accuracy class A according to IEC 60751Process connection: Thread G 1/2"More information >>>